M5570 Nordell 80 ATS £45.95

ATS-34 is a Hitachi product that is very, very similar to 154-CM, and is the premier high quality stainless. Normally hardened to around 60 Rc, it holds an edge very well and is tough enough even at that high hardness.
Blade 80x24 mm

M5571 Nordell Hunter 90 ATS £49.95

ATS-34 is a Hitachi product that is very, very similar to 154-CM, and is the premier high quality stainless. Normally hardened to around 60 Rc, it holds an edge very well and is tough enough even at that high hardness.
Blade 90x25x3.2 mm

EKA H8 Nordic Hunting Knife Blade Blank £34.95

Blade Length: 3.25 inches
Overall Length: 7.3 inches
Blade Steel: Sandvik 12C27 Steel
Hardness: 57-59 RC and sharpened

EKA W11 £39.95

This is a very fine concave grind blade blank made in Sweden by EKA.
The blade is unmarked  finished knife.
The steel is Sandvik 12c27 stainless steel.
9" total w/ a 4 1/2" blade.

Polar 62 (5260) £10.95

62 x 20mm

Polar 77 (5261) £11.95

77 x 20mm

Polar Whittler 80 (5265) £12.95

80 x 23mm

Polar 95 (5262) £13.95

95 x 20mm

Poul Strande (M5482) £69.95

Poul Strande blades represents the outermost Scandinavian forging skill

65-70x20 mm

MORA Blade N/r 2/0
Blade length 75mm x 16mm (M5311) £4.95

Mora 75mm x 15mm ( M5308 ) £8.95
Carbon steel

To fit Mora LLM90 & LLM95 Lapplander.

Brusletto Mini-Stainless knife blade (10001) £10.95

10cm total length, 5cm blade length

Brusletto Trollungen knife blade (23400) £10.95

9.3 cm total length, 5.2cm blade length

Brusletto 8cm Carbon knife blade (20800) £12.95

18.2cm total length, 8cm blade length

Brusletto 9cm Carbon knife blade (20900) £13.95

18.2cm total length, 9cm blade length

Brusletto Knivblad Jerven (21320) £14.95

14.8cm total length, 8.9 cm blade length.

Brusletto Kristin Stainless knife blade (22400) £15.95

9.3cm total length, 5.2cm blade length

Brusletto Knivblad Kystkniven (24100) £18.95

15 cm total length, 9 cm blade length.

Brusletto Sølvgutten knife blade (20720) £21.95

13.9 cm total length, 7.6cm blade length

Brusletto Falk'n Stainless knife blade (21820) £18.95

15cm total length, 8.7cm blade length

Brusletto Haugtussa knife blade (23800) £18.95

12.0 cm total length, 6.5cm blade length

Helle Ola-Kniv (56) £13.95

58mm Triple Laminated Stainless Steel

Helle Fjording (50) £13.95

70mm Triple Laminated Carbon Steel

Helle Viking (95) £13.95

89mm Triple Laminated Carbon Steel

Helle Nyling (55) £14.95

70mm Triple Laminated Stainless Steel

Helle Polar (160) £14.95

70mm Triple Laminated Stainless Steel

Helle Rallarkniv (105) £14.95

85mm Triple Laminated Stainless Steel

Helle Turmann (51) £16.95

80mm Triple Laminated Stainless Steel

Helle Fjellmann (52) £16.95

95mm Triple Laminated Stainless Steel

Helle Odel (15) £17.95

89mm Triple Laminated Stainless Steel

Helle Tollekniv (S) £18.95

110mm Triple Laminated Stainless Steel

Helle Harding (99) £19.95

100mm Triple Laminated Stainless Steel

Helle Veidemann (53) £19.95

90mm Triple Laminated Stainless Steel

Zone tempered blades with a tempering line ,cutting edge (HRC 63) extremely sharp, now with a logo.

Lauri carbon blade (M5120) £6.95

Neck
42mm x 13mm

Lauri PT 63 (M5150) £11.95
63 x 16mm

Lauri PT 77 (M5151) £12.95
77 x 20mm

Lauri PT 95 (M5152) £14.95
95 x 20mm

Lauri PTX 77 (M5153) £18.95
77 x 20mm

Lauri PTX 95 (M5154) £19.95
95 x 20mm

Lauri PT Skinner (M5155) £17.95
95 x 20mm

Lauri Carbon 70 (M5101) £9.95
70 x 14mm

Lauri Carbon 63 (M5102) £9.95
63 x 16mm

Lauri Carbon 63 (M5103) £8.95
77 x 20mm

Lauri Carbon 85 (M5104) £9.95
85 x 17mm

Lauri Carbon 95 (M5105) £10.95
95 x 17mm

Lauri Drop point (M5108) £10.95
80 x 25mm

Customers who bought the Lauri Fillet also bought this:-
M1502 Liner fillet, 155x21 mm inside £1.95

Lauri Carbon 95 (M5112) £11.95
125 x 20

Lauri Perch Fillet 130 (M5141) £11.95
Perch fillet 5"stainless steel blade

EnZo Nordic 95/01 (M5804) £32.95

3.5x24x95 mm
Total: 220 mm
Thinnered and thread tang, including a brass nut
Carbonsteel: O1
Grind: Scandi zero

EnZo Elver 85 D2 (M5832) £35.95

Blade length: 85 mm
Blade width: 25 mm
Blade thickness: 3.6 mm
Total: 190 mm
Weight: 76 g
Ground: Flat
Finish: Satin
Holes 2x4 mm, 2x4.65, 1x6.4 mm

EnZo Elver 85 D2/ScZ (5832B) £37.95

Blade length: 85 mm
Blade width: 23 mm
Blade thickness: 3.6 mm
Total: 191 mm
Weight: 86 g
Holes 2x4.1 mm, 2x4.65, 1x6.4 mm
Ground: Scandi
Finish: Satin
Steel: D2

EnZo Trapper 95 D2 (M5838) £38.95

Blade length: 95 mm
Blade width: 25 mm
Blade thickness: 3.6 mm
Total: 200 mm
Weight: 88 g
Ground: Hollow
Finish: Bead blasted
Holes 4x3 mm, 2x4 mm, 2x4.65, 1x6.4 mm

EnZo Skinner 95 D2/H £43.95

Blade length: 90mm
Blade width: 24 mm
Blade thickness: 3.6 mm
Total: 199mm

Ground: Hollow
Finish: Satin
Holes 2x4.1 mm, 1x6.4 mm, 4x4.65 mm

AE Damascus Nordic (M5367) £52.95

25 x 100mm

EnZo Camper 125 D2/Sc (M5831) £54.95

Blade length: 125 mm (5 inches)
Blade width: 26 mm
Blade thickness: 3.6 mm
Total: 245 mm
Weight: 120 g
Holes 4x4.1 mm, 2x4.65, 1x6.4 mm, 4x3.1 mm
Ground: Scandi, sec bevel
Finish: Satin
Steel: D2

EnZo Ae Damascus Sweden (M5354) £79.95

Blade length: 95 mm
Blade width: 25 mm
Blade thickness: 4 mm
Total: 210 mm
Weight: 120 g
Holes 2x4.1 mm, 3x4.65, 1x6.4 mm, 4x3.1 mm

Roselli Grandmother (R130T) £26.95

Forged Carbon Steel
61 x 19mm

Roselli Carpenter (R110T) £31.95

Forged Carbon Steel
85 x 19mm

Roselli Grandfather (R120T) £32.95

Forged Carbon Steel

Roselli Hunter (R100T) £33.95

Forged Carbon Steel
100 x 30 mm

Roselli Carpenter UHC (R210T) £48.95

Ultra High Carbon based upon the legendary wootz steel. It's high content of carbon 1.5% and carbides give the UHC a hardness up to HRC 64-66

Roselli Hunter UHC (R200T) £52.95

Ultra High Carbon based upon the legendary wootz steel. It's high content of carbon 1.5% and carbides give the UHC a hardness up to HRC 64-66.
100 x 30 mm

Linder Blade Solingen (623406) £15.95

6cm 440 Stainless Steel

Linder Blade Solingen (621007) £13.95

7cm 440 Stainless Steel

Linder Blade Solingen (625706) £16.95

6cm 440 Stainless Steel

Linder Blade Solingen (621012) £16.95

12cm 440 Stainless Steel

Linder Bowie-Knife Blade with full tang (621611) £19.95

440A steel, stainless, sharpened.
Blade length 11 cm

Linder Blade Solingen (623615) £26.95

15cm 440 Stainless Steel

Linder Blade Solingen (629008) £26.95

8cm 440 Stainless Steel

Linder Blade Solingen (621813) £29.95

13cm 440 Stainless Steel

Linder Blade Solingen (626916) £55.95

16cm 440 Stainless Steel

Linder ATS34 Hunter (M649410) £76.95

AT34 Hunter Blade with full tang. ATS34 premium steel, stainless, sharpened. 60 HRC Rockwell hardness. Ready for mounting. Comes with gaurd and rivets.
Blade length 10 cm

Citadel Baltik 4 (CDB564) £46.95

8 1/8" overall.
2 7/8" blade.
One piece DNH7 steel full tang construction.
No handles.
Create your own custom knife.

Citadel Baltik 2 (CDB562) £51.95

9 1/4 " overall.
3 3/4" blade.
One piece DNH7 steel full tang construction.
No handles.
Create your own custom knife.

Russell Green River Blade (BLRGR) £17.95

4-7/8" long blade.
9" overall.
.088" thick.
1" wide, spear point, also known as Danby's knife, three 5/32" diameter holes for pins and rivets.
Carbon Steel.

Russell Green Camp Knife Blade (BLCAM) £21.95

5" long blade.
9" overall.
.094" thick.
1-1/8" wide, very sturdy with three 5/32" diameter holes for pins and rivets.
Carbon Steel.

Unbranded 12C27 Fulltang Neck/Utility Knife Blade £12.95

This superb 12C27 fulltang neck blade. hardened to around RC58, razor sharp and ready for handling.
Overall length 8”
Blade length   3”
Thickness 1.5mm

Moon blade I £57.95

Blade length 3.25"
Overall length 7.52"
Steel 154cm

Moon blade II £14.95

Overall length 7.75"
Width 1"
Steel 12c27 sandvik

Moon blade III £57.95

Blade length 3.5"
Overall length 8.5"
Steel D2

Stockman £10.95

These kits come with the raw materials needed to create a custom knife--then you take the rough "parts" and combine them into flawless beauties with a little bit of patience!

·Kit includes:
·(1) each clip point, sheepfoot and spey blades
·(1) brass center liner
·(2) backsprings
·Features:
·Stainless steel blades
·Wood handle
·Brass liners with attached bolsters
·Extra brass pins included
·Assembly required
·Insructions included
·4" closed after assembly

Large Lockback £11.95

Kit includes:
·(1) clip point blade
·(1) lockbar
·(1) backspring
·Features:
·Stainless steel blades
·Wood handle
·Brass liners with attached bolsters
·Extra brass pins included
·Assembly required
·Insructions included
·5" closed after assembly

Opinel No8 £11.95 including postage

Ebauches" as they are called in France are finally available in the U.K. This knife's handle is intended to be carved in to whatever you can dream of,  dogs head ,fish ,pheasant, ect,ect
This knife can also be left "as is" after a little sending if you like a longer knife with a larger grip handle. Note: Due to the thickness of the handle, the blade may be difficult to open since the nail groove is completely cover by wood.

Opinel No8 is the most versatile size in the ever growing line of Opinel folding knives. This knife is small enough to be used as a pocket knife.

Handle: Walnut (the woods)
Blade: 12C27 MOD Sandvik Stainless Steel (the steels)
Size open: 8. 1/2"
Blade: 3. 1/4"
Weight: 2.3 oz

Available in Maple, Cherry and Walnut  with 12c27 Sandvik Steel or Cherry with carbon steel.